Why is my Samsung TV showing a WPS error?

Fix Samsung TV WPS errors caused by router settings, signal strength, or incorrect setup. Learn how to troubleshoot WPS connection issues step by step.

If your Samsung TV displays a WPS error during Wi-Fi connection, it typically means the TV couldn't establish a secure link with your router using the Wi-Fi Protected Setup (WPS) feature. This issue often occurs due to router settings, physical distance, or incorrect configuration. Follow these steps to resolve the problem.

1. What causes a WPS error on Samsung TVs?

A WPS error on your Samsung TV usually stems from one of the following reasons:

- The WPS feature is disabled on your router.

- Your TV is too far from the router, causing weak signal strength.

- The WPS button on your router was not pressed at the correct time.

- The router's firmware is outdated or incompatible with your TV.

- Interference from nearby devices or networks disrupts the connection.

2. How to fix a WPS error on your Samsung TV

Follow these steps to resolve the WPS error and reconnect your TV to your Wi-Fi network:

1. Check if the WPS feature is enabled on your router. Refer to your router's user manual or log in to its admin interface to confirm.
2. Locate the WPS button on your router. It is typically found on the back or side panel.
3. On your Samsung TV, go to Settings > Network > Wireless.
4. Select WPS Connection and follow the on-screen instructions.
5. Press and hold the WPS button on your router for 2–3 seconds until the LED light starts flashing.
6. Wait for the TV to detect the router. Once connected, press OK to confirm.

3. What to do if the WPS connection fails

If the WPS connection still fails after following the steps above, try these additional solutions:

- Move your router closer to your TV to improve signal strength.

- Restart both your TV and router to reset their connections.

- Update your router's firmware to ensure compatibility with your TV.

- Use an Ethernet cable for a stable connection instead of WPS.

- Reset your TV to factory settings and attempt the WPS connection again.

4. Supported Samsung TV models

WPS functionality is available on most Samsung TVs released after 2016, including the Galaxy Series, QLED, Neo QLED, and Frame TV models. Always refer to your TV's user manual for specific details.

5. Related Samsung support topics

- How to connect your Samsung TV to Wi-Fi manually

- Troubleshooting weak Wi-Fi signals on Samsung TVs

- Resetting your Samsung TV to factory settings